Supplies Donation Form

N95 Respirators

Disposable N95 respirators must meet the following minimum specifications.

 

• Must have FDA/NIOSH Certification TC-xxx-xxxx
• Verify the manufacturer is an approved from CDC NOISH list (source)

Non-NIOSH Respirators

Non-NIOSH disposable respirators must meet the following minimum specifications.

 

• Must meet classification of FFP2 or FFP3 or KN95 or equivalent.

Surgical Masks

Disposable surgical masks must meet the following minimum specifications.

 

• Must have evidence of U.S. Food and Drug Administration (FDA) clearance.
• Should have device name "surgical mask" and product code "FXX"
• Establishment Registration & Device Listing: (source)
• List of FDA Emergency Use Authorizations: (source)

Isolation Gowns / Suits & Hospital Gowns

Isolation gowns must meet the following minimum specifications.

 

• ANSI/AAMI PB70 classifies the garments used in the healthcare industry, such as surgical and isolation gowns as meeting ANSI/AAMI PB70 Level 3, or 4 standards: ANSI/AAMI PB70External.
• Surgical gowns meet ASTM F2407 Standard Specification for Surgical Gowns intended for Use in Healthcare Facilities (FDA Recommendations)
• Hospital gowns are disposable

Nitrile Exam Gloves

Nitrile exam gloves must meet the following minimum specifications.

• Non-Latex and Non-Vinyl gloves only

Facial Shields

Facial shields must meet the following minimum specifications.

 

• Visors manufactured from acetate, propionate, and polycarbonate.
• Visors treated for anti-glare, anti-static, and anti-fogging properties are best.
• Face shields must be, at a minimum, full-face length with outer edges of the face shield reaching at least to the point of the ear, include chin and forehead protectors, and cover the forehead.
• Brow caps or forehead cushions should be of enough dimensions to ensure that there is adequate space between the wearer’s face and the inner surface of the visor to allow for the use of N95 respirator and eyewear.
• Face shields with single Velcro or elastic straps.

Eye Protection (Goggles)

Goggles must meet the following minimum specifications.

 

• Indirectly vented.
• Have manufacturer's anti-fog coating.
• Have marking "D3" for splash or droplet protection.

Hand Sanitizer

Hand sanitizer must meet the following minimum specifications.

 

• 60% Alcohol Minimum

Touchless Hand Sanitizer Dispensers

Shoe Covers

 

Ventilators

Ventilators must meet the following minimum specifications.

 

• Must provide Pressure Control Ventilation and Volume Control Ventilation.
• Must support Blending of Oxygen and Air.
• CPAP mode – continuous positive airway pressure
• Positive End Expiratory Pressure and Pressure Support

Sanitary Wipes/Sanitation Wipes

 

Thermometers

Thermometers must meet the following minimum specifications.

• Ear thermometers
• Temporal thermometers
• No touch thermometers

Lodging

 

Other